Mindvision 1.3MP High Speed Short Wave Infrared Area Scan 0.4-1.7um 1/2" Ingaas Industrial Camera

• Customization: Available
• Sensor: 1/2"Ingaas
• Shutter Type: Global Shutter
• Model NO.: MV-GEC130I
• Camera Type: Swir
• Pixel Size: 5umx5um
• Effective Pixels: 1.3MP
• Resolution @Frame Rate: 1280X1024@72fps
• Exposure Mode: Frame Exposure
• Sensitivity: 121mv 1/30s
• Gpio: 2 Optocoupler Isolated Inputs
• Output Pixel Width: 12bit
• Frame Buffer: 256m Bytes
• Exposure Time Range: 0.0130~7987.2ms
• Maximum Gain(Multiple): 126
• Trademark: mindvision
• Origin: China
• Production Capacity: 200

Product Description

Product Description

What is Short Wave Infrared (SWIR) Area Scan Camera ? 

A Short Wave Infrared (SWIR) Area Scan Camera is a specialized imaging device that captures two-dimensional images using the short-wave infrared spectrum, typically within the wavelength range of 0.9–2.5 μm

Features of Short Wave Infrared (SWIR) Area Scan Camera

1. Sensors: Uses materials like indium gallium arsenide (InGaAs) instead of silicon, which is limited to wavelengths below ~1.1 μm. InGaAs sensors efficiently detect SWIR light (0.9–1.7 μm), with some advanced systems extending to 2.5 μm.

2. Operation: Captures full-frame 2D images (unlike line-scan cameras), making it suitable for static or slow-moving scenes.

3. Lighting: Use SWIR-specific active illumination (LEDs/lasers) or ambient SWIR radiation, depending on the application.

Advantages of Short Wave Infrared (SWIR) Area Scan Camera

1. Material Transparency: Penetrates materials opaque to visible light (e.g., silicon, plastic, fog) for non-destructive
inspection.

2. Contrast & Differentiation: Enhances details in scenarios where visible light fails, such as distinguishing moisture, chemical
compositions, or material defects.

 3. Low-Light Performance: Effective in night vision with minimal ambient light, as SWIR leverages ambient nightglow (e.g.,
starlight).

Application 1 

Designed for short-wave infrared imaging
Application 2
microscopic imaging for research in low illumination

Product

Product Features

InGaAs detector, response wavelength 0.4~1.7um. 
Semiconductor refrigeration, can be cooled ambient temperature difference of 20 degrees. 
Black level correction, good image uniformity. 
Gigabit network interface, compatible with vision standards. 
Designed for short-wave infrared imaging and microscopic imaging for research in low illumination. 
Resolution 1280X1024, frame rate up to 72FPS, support ROI. 
Direct support for halcom, visionpro and other software, easy 
MV-GEC130l is a special camera that senses visible light and 
short-wave infrared, which is suitable for fluorescence 

Product Description

Model Specifications	MV-GEC1301
Sensor	1/2"InGaAs
Shuttertype	Global shutter
Cameratype	SWIR
Pixelsize	5umx5um
Effectivepixels	1.3MP
Resolution@framerate	1280X1024@72FPS
Exposuremode	Frame exposure
Sensitivity	121mV 1/30s
GPIO	2 optocoupler isolated inputs,2 optocoupler isolated outputs,and 1 bidirectional non-isolated IO, which supports trigger andflash synchronization modes
Outputpixelwidth	12bit
ADwidth	12bit
Framebuffer	256M Bytes
Exposuretimerange	0.0130~7987.2ms
Maximumgain(multiple)	126
UserEEPROM	2K Bytes
Videooutputformat	Mono 8bit
Visualstandardprotocol	GigE Vision,GenlCam
Lensinterface	C-mount
Port	Gigabit Network

Powersupply	Support 12-24V with a tolerance of plus or minus 10%,typical value:12V
Power	<12W
Boundarydimension	69(mm)X69(mm)X44(mm)(without lens and rearcase connectors)
Weight	<250g
Refrigerationsystem	Semiconductor refrigeration,can be cooled ambient temperature difference of 20 degrees
Workingtemperature	0~50℃
Workinghumidity	20~80%(No Condensation)
Storagetemperature	-30~60℃
Storagehumidity	20~95%(No Condensation)
Operatingsystem	WINXP/7/8/10/1132&64-bit systems,Linux 32&64-bit systems,ARM Linux system,Android system and MAC system
Driveprogram	Support GigE Vision protocol software,Directshow components,Halcon dedicated components, Labview dedicated drivers,OCX components and TWAIN components
Programminglanguage	C/C++/C#/VB6/VB.NET/Delphi/BCB/Python/Java
Otherfunctions	Support any size ROl custom resolution,contrast and gamma adjustment,saturation adjustment,white balance correction, black level correction,custom dead point coordinate correction,SP image processing acceleration,3D noise reduction, custom LUT table,frame rate adjustment,custom camera name,etc.

Line Sequence Definition

FAQ

1. who are we?
We are based in Guangdong, China, start from 2013,sell to Domestic Market(90.00%),North America(10.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Industrial Camera,Smart Industrial Camera,Industrial Lens,Industrial Light source,Camera Module

4. why should you buy from us not from other suppliers?
ShenZhen MindVision Teconogy Co,Ltd is an intelligent enterprise providing products and solutions in the field of machine vision, incorporates research, manufacturing sales and service with professional technologies and excellent manufacturing process

5. what services can we provide?
Accepted Delivery Terms: EXW;
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T;
Language Spoken:English,Chinese